![DAA Extra-Short Dillon Powder Bar](https://testshop.indoorswiss.ch/img/p/de-default-medium_default.jpg)
DAA Extra-Short Dillon Powder Bar
Large
Info, wenn Artikel wieder an Lager
Gerne informieren wir Sie, wenn das Produkt wieder verfügbar ist. Die Information wird automatisch ein einziges Mal an die hinterlegte E-Mail-Adresse geschickt.
Wichtig: ist der Status auf "Wird bestellt", so führt dieser Vorgang nicht dazu, dass wir den Artikel bestellen!
Beschreibung
The DAA Extra-Short Dillon Powder Bar was developed to meet a specific need, created with the introduction of the Dillon XL750 press: In the 750, the Dillon Powder Measure is angled such that the powder bar must extend directly over station #4 in the toolhead, and it cannot be repositioned. This Is not an issue if you have a short die in that station. However, if you wish to run a powder check in station #3, and a bullet dropper in station #4, as many do, this creates a serious problem. The original Dillon Powder Bar is too long, and it will extend and impact the bullet dropper in station #4, preventing correct function.
In order to resolve this problem, we designed an innovative extra-short powder bar that shortens the extension range towards station #4 by a full 30mm (1.15”), resolving the issue. When fully extended, our charge bar stops short of contacting a Mr.Bulletfeeder Dropper or Mini Mr.BF tube assembly.
The charge capacity of the Extra-Short bar is approx.. 95% of the Original Dillon small charge bar.
This design does require the use of a 2.5mm Allen key (not included) to adjust the powder charge, and the Click-Adjustable screw has 12 clicks per rotation for precise charge setting.
Made from black anodized 6061 Aluminum.